DIN Rail Mount 4 Channel 6 Amp SSR (Solid State Relay) Module Board.
This item has been assembled, and electrical test passed.
LED indicator for relay action.
MOC3043 Phototriac and BTA12-600B triac.
Jumper cap options for relays in common negative or common positive configurations.
High quality PCB housing/carrier, DIN rail mountable - for width 35 / 32 / 15mm rails.
DIN mount case can be taken apart for panel mount use.
High quality FR-4 fiber glass PCB.
PCB dimensions: L 150mm x W 72.5mm x H 39mm / 5.90" x 2.85" x 1.53"
External dimensions: L 153mm x W 87 x H 61mm / 6.02" x 3.42" x 2.40"
Input signal control terminal:
Action voltage: 3 ~ 32 VDC.
Current: 6mA at 5VDC, 8mA at 12VDC, 11mA at 24VDC, 13mA at 32VDC.
Turn off voltage: 0 ~ 0.8 VDC.
In-Out isolation surge voltage: 7500V.
Output terminal:
Load voltage range: 100 to 240 VAC (50/60Hz).
Max. on-state average current: 6 Amp.
Max. on-state current: 12 Amp (< 10 seconds).
Non repetitive surge peak on-state current: 120 Amp (<20mS).
Max. on-state voltage drop: 1.5V.
Max. off-state current: < 2mA / at 220VAC.
Off-state max. allow voltage: 400V.
Isolation: Phototriac.
Zero cross: Yes.
Load type: General purpose.
Terminal block specifications:
Wire range: 24 ~ 12 AWG.
Strip length: 7mm.
Screws - M2.5, steel, Cr3+ Zn plated.
Pin header and Cage - Brass.
USD
EUR
GBP
CAD
AUD